MAG 250 Technical Issues

[Magrich]

Hello everybody, i have succesfully flashed my dead mag250 back to life. I used a jtag to programm the bootloader back to flash

regards Triton

Would you be able to flash my mag 250 for a fee as I’m not very savvy about technology?

Hi, i think if we can ship the board only within an envelopp, i think it will be cheap the send it. are you from uk ?
the only thing that i need to know is serial number and mac address

Yes I could send the board only with the serial and Mac enclosed.. How much would it cost me and are you in the uk?

 

[Triton]

I will order the goods tomorrow, after you flash and get box working triton , does it the try to update to r22 again ?. Mine update befor it connects to server

thanks

Hi, you can nevermore update to r22, this firmware is a clone killer. Last working Firmware is about July 2017. You have to check that you have the autoupdate disabled

 

[Triton]

Would you be able to flash my mag 250 for a fee as I’m not very savvy about technology?

Hi, i think if we can ship the board only within an envelopp, i think it will be cheap the send it. are you from uk ?
the only thing that i need to know is serial number and mac address

Yes I could send the board only with the serial and Mac enclosed.. How much would it cost me and are you in the uk?

Hi, i live in switzerland. I have calculated the coast for send them back, it is about 8 £. But 8 £ transfering hmmmm,
i think that makes not sense. If it cost not more than 8 £, i will send it back for free

 

[Magrich]

Hi, i think if we can ship the board only within an envelopp, i think it will be cheap the send it. are you from uk ?
the only thing that i need to know is serial number and mac address

Yes I could send the board only with the serial and Mac enclosed.. How much would it cost me and are you in the uk?

Hi, i live in switzerland. I have calculated the coast for send them back, it is about 8 £. But 8 £ transfering hmmmm,
i think that makes not sense. If it cost not more than 8 £, i will send it back for free

That sounds good to me.. If you have paypal I can send you the money as I appreciate your effort. I could also make a bank transfer. If you give me your address I’ll send the board to you.

 

[Triton]

If anyone else has done this successfully can you post results ? Looks really complicated

thanks

believe me, it is not.....

@Triton. Just a quick question while I wait for the equipment to arrive Is it BD0 20 and BD1 18 as you state these in your post but the pdf states CD0 20 and CD1 18. Thanks

The Pins CD0 and CD1 from the PDF is for this Board:

Pins BD0 and BD1 ist for this Board:

 

[Mikeios]

believe me, it is not.....

@Triton. Just a quick question while I wait for the equipment to arrive Is it BD0 20 and BD1 18 as you state these in your post but the pdf states CD0 20 and CD1 18. Thanks

The Pins CD0 and CD1 from the PDF is for this Board:

Pins BD0 and BD1 ist for this Board:

@ Triton. Thanks very much for your reply. Much appreciated. Mike.

 

[Magrich]

Yes I could send the board only with the serial and Mac enclosed.. How much would it cost me and are you in the uk?

Hi, i live in switzerland. I have calculated the coast for send them back, it is about 8 £. But 8 £ transfering hmmmm,
i think that makes not sense. If it cost not more than 8 £, i will send it back for free

That sounds good to me.. If you have paypal I can send you the money as I appreciate your effort. I could also make a bank transfer. If you give me your address I’ll send the board to you.

My email
renglefi@gmail.com

 

[Oscarcolo]

Hi Triton
Really struggling to understand how to set parts up ,if I where to send them to you would you put them together for me if if any could ( for a fee of course ) would much appreciate it

 

[Triton]

Hi Triton
Really struggling to understand how to set parts up ,if I where to send them to you would you put them together for me if if any could ( for a fee of course ) would much appreciate it

Hi Oscarcolo, i can build one for you. I have Parts left to build one. You can send me the Coast over Paypal ok ? Where do you live ? (for calculating shipping coast)
And i need your Adress. You can send the Adress to mag250@funnymail.de (for the next 24h)

 

[Oscarcolo]

Done

 

[Oscarcolo]

Hey triton , did you get payment .?

 

[DanROdd]

I also emailed you Triton

 

[Triton]

I also emailed you Triton

Hi, why you have mailed me and about what ?

 

[Koevoet]

Gents , this is a very easy mode to do , the ribbon cable connector is not essential , you can just solder your needed wires to the programmer and pin-outs on the board, the rest of the Jtag and serial method is pretty straight forward.

 

[betek]

Hello, in the beginning I will say that I do not speak English. she writes with a translator ...

I have mag250, software 0.2.18-r22, I watch normal internet TV, everything is ok. However, if I leave the decoder turned on or off for the night, in the morning I have to turn off the decoder every day because it is suspended and nothing can be done ... I no longer have ideas for a solution, can anyone help?

 

[Malik90]

Hello contact with your reseller to check your line

 

[betek]

I bought a decoder from a friend, so what should I do?

 

[betek]

I do not understand.

 

[Malik90]

The name of the reseller?

 

[betek]

Internet TV?