Thanks mate, it looks very straight forward but can't actually try until I get back home in about 8 hours as I'm at work and very focused hehe. Will confirm once sorted so might help another noob like me.
Regards
lorocator
Mag 245/322 Technical Issues
- Thread starter IPTV Community
- Start date
-
- Tags
- 0.2.18-r19 250 254 access audio problem block broken can`t move channels date firmware freeze hd channels hide huawei infomir informir lte mag mag 254 mag 256 mag 322 mag 324 mag box mag epg mag250 mag254 mag254 youtube problem mag322 mag324 malfunction no sound in vod non-responsive offline parental password problem rapidtv recording remote remote control reset romania router scrolling siptv slow stb blocked sync time trouble unblocking vod problem wi-fi youtube app
Regards
lorocator
Hi,
I'm new to rapidiptv and mag, could you please let me know how to sync date and time on the MAG254 as it's on the year 2000.
I read about putting this on the NPT server, in my case UK:
uk.pool.ntp.org
Is this correct ot is there another step involved?
Many thanks
I'm new to rapidiptv and mag, could you please let me know how to sync date and time on the MAG254 as it's on the year 2000.
I read about putting this on the NPT server, in my case UK:
uk.pool.ntp.org
Is this correct ot is there another step involved?
Many thanks
Hi harrypotter, I did as you said.
Pressed app and press ok, I see a blue X appear but nothing.
I already have a parental code but nothing it's just doesn't seem to save it, I tried as many combinations as possible but the channel still accessible and no code is required.
Maybe I'm having a moment here, can you please explain the steps in more detail or could it be something in the system not allowing this?
Sorry for that. Thanks
Pressed app and press ok, I see a blue X appear but nothing.
I already have a parental code but nothing it's just doesn't seem to save it, I tried as many combinations as possible but the channel still accessible and no code is required.
Maybe I'm having a moment here, can you please explain the steps in more detail or could it be something in the system not allowing this?
Sorry for that. Thanks
It looks like rapidiptv portal is not permiting to have anything blocked except content blocked by them 
Yes you are right, I'm glad at least I have some confirmation, but definitely is making me think about renewing.
Thanks for the tip! it works perfectly again. I use for Germany 0.de.pool.ntp.org
but the 0 I must also write, otherwise it is not.
I just changed internet service provider. Went from Vodafone LTE (using Fritzbox router) to Movistar LTE (Huawei router).
My MAG 254 isn't working on the new router. Everything acts as normal until I select a channel or video club programme.
The channel starts eventually but takes about 5 minutes. During that time a blue channel name bar will "come and go" along the bottom if the screen.
I cannot find anyone reporting a similar priblem on the forums although I did find references to doing an "IPTV Reset" when changing routers. I have not managed to figure out how to do such a reset though!
Any advice gratefully received. Thank you.
My MAG 254 isn't working on the new router. Everything acts as normal until I select a channel or video club programme.
The channel starts eventually but takes about 5 minutes. During that time a blue channel name bar will "come and go" along the bottom if the screen.
I cannot find anyone reporting a similar priblem on the forums although I did find references to doing an "IPTV Reset" when changing routers. I have not managed to figure out how to do such a reset though!
Any advice gratefully received. Thank you.
I tested the box on another connection (Movistar fibre) and it is working fine. Back on the LTE connection, the bahaviour has changed now (not sure what I did) - It is loading channels now but after a few minutes a red box appears at the top with "Connection Problem" in it. Then the channel list goes blank.
Sounds similar to my problem. What internet service provider are you with and what type of router?
Format your key in fat32 make dir 254 and copy all files there, then try to flash.
FIRST STEP
1).DOWNLOAD SOFTWARE-- Download and extract from http://soft.infomir.com.ua/ and choose Mag 254
"bootstrap_254" and "imageupdate_ul" then rename both of them to bootstrap and imageupdate respectively.
2).Place the both files (imageupdate and Bootstrap) into a folder called mag254 on your USB stick
SECOND STEP (BIOS) WIPE THE BOX:
PLUG IN POWER SUPPLY > HOLD MENU BUTTON
Enter The BIOS. > choose “Def. Settings” > press the right. If Message "Wrong message" pops up IGNORE;
Press “OK”.> Select “Exit & Save” to save and exit.
STB will reboot automatically.
message ´Tftp load ´ will be on screen. Now unplug POWER lead.
FINAL STEP: (BIOS) FLASH THE BOX
1) Plug the USB Stick in the REAR USB Port
2) Power the STB on - press and hold the MENU button (just above the volume up button - you have to be quick)
3) Go to Upgrade Tools, then USB bootstrap.
This will then flash the STB with all your portal settings, be patient. Proceed with normal set up.
